Professional slab leak detection and plumbing repair across the Phoenix metro area. We test first, pinpoint the source, and explain the repair before unnecessary concrete or flooring is opened.
Book Slab Leak DetectionPhoenix Metro Slab Leak Detection & Repair | Licensed Plumbing Contractor
If you hear water running when fixtures are off, see your water bill climb, notice warm or wet areas on the floor, or suspect a hidden plumbing leak beneath the slab, Leak Tech LLC can test the system and pinpoint the source before unnecessary concrete or flooring is opened. Licensed • Bonded • Insured AZ ROC #360185 - Licensed Plumbing Contractor Residential & Commercial
We isolate the suspected plumbing and pressure test the line to confirm whether it is actually losing pressure. This separates a real plumbing leak from unrelated water use or surface moisture.
Hot and cold water lines are isolated as needed so the leak can be narrowed to the affected section of the plumbing system instead of guessing where the problem is.
Sensitive acoustic equipment is used to listen for the sound created by escaping water or air beneath the slab and help narrow the leak to a smaller search area.
Once the test results point to the leak area, we mark the location and explain what was found before any access or repair work begins.
REAL SLAB LEAK WORK
These are real Leak Tech LLC slab leak detection and plumbing repair jobs. The photos show the process from inspection and pressure testing through leak location, targeted access, exposed plumbing, and repair.
Plumbing Line Inspection - inspecting accessible plumbing before narrowing the leak source.
Pressure Testing - testing the plumbing line to confirm whether it is losing pressure.
Electronic Leak Detection - specialized equipment helps narrow the hidden leak location.
Leak Location Marked - the suspected slab leak area is marked before access is opened.
Floor Area Marked - the leak location is identified on the finished floor before repair access.
Targeted Access Opening - only the area needed to reach the plumbing is opened.
Slab Opened for Repair - concrete is opened after the leak area has been narrowed.
Exposed Copper Line - the underground water line is exposed for inspection and repair.
Copper Pipe Repair - the damaged plumbing section is accessed and repaired after detection.
When access requires opening concrete, flooring, or surrounding finishes, Leak Tech LLC restores the repair area as closely as reasonably possible to its original appearance.
When Leak Tech LLC performs the slab leak repair, the slab leak detection fee is applied as a credit toward the repair.
Leak Tech LLC slab leak repairs include a one-year warranty on the completed repair workmanship.
Common warning signs include an unexplained high water bill, a water meter that keeps moving when fixtures are off, the sound of running water, warm areas on the floor, wet flooring or carpet, low water pressure, or water appearing near the foundation.
No. The goal of leak detection is to confirm and narrow the leak location before access is opened. Pressure testing, line isolation, tracing, and electronic listening are used first.
Yes. Leak Tech LLC is a licensed Arizona plumbing contractor and can handle both slab leak detection and the plumbing repair under AZ ROC #360185.
Depending on the leak location and condition of the plumbing, options may include direct access repair, rerouting or bypassing a line, or replacing a larger affected section.
We explain the test results and the identified leak location so the property owner understands what was found and what the next repair step is.
A slab leak is a water-line leak beneath or within the concrete foundation. Because the pipe is hidden, the first sign is often not visible water. Many homeowners first notice a higher water bill, a meter that continues to move, warm flooring from a hot-water leak, or the sound of water when nothing is running.
Opening the wrong area can create unnecessary damage and cost. A proper slab leak inspection is designed to confirm which line is leaking and narrow the source before flooring, tile, or concrete is removed. Leak Tech LLC focuses on testing first, then opening only the area that makes sense based on the findings.
The same company that locates the leak can also perform the plumbing repair. This keeps the diagnosis and repair under one scope, reduces confusion between separate contractors, and gives you one team responsible for explaining what was found and how it will be repaired.
Leak Tech LLC provides professional slab leak detection and plumbing repair throughout the Phoenix metro area. If you suspect a hidden leak under the slab, schedule an inspection so the plumbing can be tested and the leak location identified before the problem causes additional water loss or property damage.
Get the plumbing tested and the leak area identified before the problem causes more water loss or unnecessary damage.
